Mold remediation in Pomona begins with a prompt, professional inspection of your property. Our certified technicians locate visible mold colonies and detect hidden fungal growth using moisture meters and thermal imaging cameras. We isolate contaminated areas with poly sheeting and negative-air machines to stop spore spread, then start the remediation process immediately to prevent further damage.
Our mold removal process follows IICRC-certified protocols and EPA mold guidelines. We remove contaminated porous materials when necessary, deploy HEPA-filtered air scrubbers to capture airborne spores, perform controlled demolition of affected drywall and insulation, and sanitize all surfaces. Every Pomona mold remediation project meets Remediation Level 2 and Level 3 standards for thorough decontamination.
During mold remediation, we dispose of mold-infested porous materials including drywall, insulation, and carpet that cannot be fully cleaned. Our Pomona mold removal team seals contaminated waste to prevent spore release, following strict safety protocols and California state regulations for hazardous material disposal.
After mold removal, we dry and dehumidify the structure using Phoenix dehumidifiers and industrial air movers. This eliminates residual moisture - the root cause of mold growth - and restores safe indoor conditions. Our structural drying process addresses wall cavities, subfloors, and crawlspaces common in Pomona residential properties and commercial buildings.
We document every mold remediation step with photos, moisture readings, air quality testing results, and before/after reports. This comprehensive remediation documentation supports insurance claims, satisfies property management requirements, and provides clearance verification. Our Xactimate reports meet insurance compliance standards for Pomona property owners.
We conduct thorough mold inspections to detect visible colonies and hidden spore growth throughout your Pomona property. Our technicians identify moisture sources, assess contamination scope using air sampling cassettes and surface swabs, and deliver a written assessment report before remediation begins. This inspection covers HVAC systems, crawlspaces, attics, and wall cavities where mold often grows undetected.
Our mold removal service cleans hard surfaces using HEPA-filtered vacuums and antimicrobial solutions. For contaminated porous materials that cannot be salvaged, we safely remove and dispose of affected drywall, insulation, and flooring. Every Pomona mold removal project follows strict containment protocols to minimize spore release and protect occupant health.
For severe contamination including Stachybotrys (black mold) that poses serious health risks, we apply specialized containment with negative pressure systems, perform complete removal of affected materials, apply biocide treatment when warranted, and run HEPA air filtration continuously. Our black mold remediation in Pomona restores safe indoor air quality for homes and businesses.
After remediation, we address long-term mold prevention through moisture control, dehumidification, ventilation improvements, and humidity monitoring. Our Pomona mold prevention services include vapor barrier installation, leak detection recommendations, and guidance on maintaining moisture levels below 60% to stop mold recurrence.
Mold remediation in Pomona requires precision, certified expertise, and strict safety compliance. Clean and Dry Restoration provides complete mold remediation services for homes and businesses throughout Pomona CA and the Inland Empire. Our IICRC-certified technicians follow EPA mold guidelines and California state regulations to address mold contamination completely - from initial inspection through removal, structural drying, and prevention.
We deploy professional-grade equipment including Delmhorst moisture meters, FLIR thermal imaging cameras, Dri-Eaz air scrubbers, negative pressure containment systems, and Phoenix industrial dehumidifiers. Our team handles small mold patches in apartments, extensive fungal growth in commercial buildings, and sensitive environments like schools, offices, and retail spaces throughout Pomona. The remediation process includes safe removal of contaminated materials, HEPA air filtration, structural drying of wall cavities and subfloors, and post-remediation verification testing.
For commercial clients in Pomona, we coordinate mold remediation around business hours to minimize disruption and maintain operations. For residential clients, we protect occupant safety and restore healthy indoor air quality. Our thorough documentation satisfies insurers, property managers, and building owners. With Clean and Dry Restoration, your Pomona mold problems are addressed quickly, safely, and completely.
Mold patches - often appearing black, green, or white - on drywall, baseboards, or ceilings indicate a mold infestation requiring professional mold remediation. Pomona homes with older stucco and plaster construction often trap moisture in wall cavities, creating hidden colonies that spread beyond visible areas.
Lingering musty smells, especially after water damage or plumbing leaks, often signal hidden mold growth behind walls, under floors, or above ceilings. These odors indicate moisture problems that require professional mold inspection and remediation to protect indoor air quality.
Pipe bursts, roof leaks, slab leaks, or flooding increase mold risk significantly. Mold spores begin to grow within 24-48 hours of water intrusion. Pomona properties affected by water damage need prompt mold remediation to prevent extensive fungal growth and costly structural repairs.
If occupants develop coughing, sneezing, headaches, or respiratory symptoms - especially after water events - mold exposure may be present. These health symptoms indicate the need for professional mold inspection, air quality testing, and remediation to restore a safe indoor environment.
Discoloration, peeling paint, warped flooring, or persistently damp walls often indicate hidden moisture problems. These conditions create ideal breeding grounds for mold growth and demand professional structural drying and mold remediation before contamination spreads.
Our Pomona mold remediation process begins with comprehensive inspection of visible and hidden areas including walls, ceilings, crawlspaces, attics, and HVAC systems. We use Delmhorst moisture meters and FLIR thermal imaging to moisture-map your property, identify water intrusion sources, and document contamination extent before starting remediation work.
We isolate affected zones with ZipWall containment systems and poly sheeting, then establish negative pressure using air scrubbers to prevent spore spread to unaffected areas. HEPA filtration units run continuously during mold remediation to capture airborne spores and protect indoor air quality throughout your Pomona property.
On non-porous surfaces, we HEPA-vacuum, scrub, and apply antimicrobial solutions to decontaminate. For porous materials with extensive mold growth - drywall, insulation, carpet, ceiling tiles - we safely remove and dispose of contaminated materials, sealing waste to prevent spore release during transport.
After mold removal, we clean all surfaces with antimicrobial treatment, then deploy Phoenix dehumidifiers and Injectidry systems to dry the structure thoroughly. This structural drying process addresses wall cavities, floor joists, and subfloors, eliminating residual moisture that could fuel mold regrowth.
We perform post-remediation verification including moisture readings, visual inspection, and air quality testing to confirm successful mold remediation. We deliver a comprehensive clearance report with photos, moisture logs, and testing results for insurance claims, property records, and safe re-occupation of your Pomona home or business.
Phoenix dehumidifiers and air movers reduce humidity quickly after mold remediation, drying wall cavities and structural materials to safe moisture levels that prevent mold recurrence.
Dri-Eaz air scrubbers and dehumidifiers remove airborne mold spores and control humidity levels - essential equipment during and after mold cleanup in occupied Pomona buildings.
FLIR thermal imaging cameras detect hidden moisture behind walls, ceilings, and floors, guiding targeted mold remediation and preventing missed contamination in Pomona properties.
Kärcher wet vacuums and extractors remove standing water and residual moisture from surfaces and materials during the water damage and mold cleanup phases.
Mytee cleaning and extraction equipment supports deep surface decontamination and moisture removal on hard floors and upholstery affected by mold growth.
Hydro-X extraction mats and tools remove dampness from flooring and subfloor layers before structural drying begins, accelerating the mold remediation timeline.
ZipWall containment systems seal off mold-affected zones in Pomona residential and commercial properties, preventing spore spread and protecting occupant health during remediation.
Injectidry systems dry wall cavities, floor joists, and structural voids, eliminating hidden moisture that could foster new mold growth after remediation.
Delmhorst moisture meters monitor structural moisture before and after mold remediation, confirming complete dryness and reducing risk of mold recurrence in Pomona properties.
We document all mold remediation steps - scope, labor, materials, moisture readings - in Xactimate for insurance compliance, claims processing, and property management records.
Mold remediation is the comprehensive process of identifying contamination, containing affected areas, removing or cleaning mold-infested materials, drying the structure, and preventing future moisture problems. Professional mold remediation in Pomona restores a safe, healthy indoor environment for homes and businesses.
Mold spores begin to grow within 24-48 hours of water intrusion or sustained humidity above 60%. Pomona's Inland Valley heat can accelerate mold growth after water damage, making prompt remediation critical to prevent extensive contamination.
Small mold patches on hard, non-porous surfaces may be cleaned with appropriate solutions. However, extensive mold growth, hidden contamination behind walls, or mold on porous materials like drywall and insulation requires professional mold remediation to prevent spore spread, structural damage, and health risks.
Yes. Commercial mold remediation in Pomona requires stricter containment protocols, continuous air quality monitoring, coordination with building occupants, and detailed documentation for compliance. We provide specialized commercial mold services for offices, retail spaces, schools, warehouses, and multi-family buildings.
We address the root cause of mold - moisture - through complete structural drying, dehumidification, ventilation improvements, leak repairs, and ongoing humidity monitoring. Our post-remediation documentation includes moisture readings and prevention recommendations to maintain a mold-safe environment in your Pomona property.
Mold remediation costs vary based on contamination extent, affected materials, and property size. We provide detailed assessments and Xactimate estimates for insurance-approved pricing. Contact Clean and Dry Restoration for a free mold inspection and remediation cost estimate for your Pomona home or business.
Many homeowners insurance policies cover mold remediation when the mold results from a covered water damage event like a burst pipe or appliance failure. Our detailed remediation documentation supports insurance claims for Pomona property owners.
